Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic, iron, steel and so on.Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy to operate, which greatly improves the accuracy and saves time.Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and oil-proof, you can use it with confidence.1.2 cm, which can meet your needs when you're using engraving machine 40 x 10 mm, and the length of cable measures approx. Size parameters: the size of this setting touch plate probe measures approx.Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and exquisite design This Z-Axis router mill touch plate tool is really a practical and useful tool for engraving machine.Robotics, 3D Printing & Science Education.Sports Medicine, Equipment & Accessories.If you learn how to use this you will never need to measure the stock thickness again. Since we know that 12mm is only the nominalthickness of the stock and it will be either thicker or thinner than that you will either not cut all the way through your stock or you will cut all the way through and into the spoilboard. My putting the plate on top of the stock and zeroing there the cutter will be what ever the material thickness is from the table top. If sit the plate on the tabletop and enter a material offset of 12mm (1/2') then the cutter will be zeroed 12mm above the table top just as it would had you zeroed to the surface of a piece of 12mm stock.īy using the material offset and putting the plate on the table top the cutter will be zeroed 12mm above the table top. If you sit the plate on the surface of the material then the offset is zero and the cutter will sit perfectly on the material surface.

Put simply the Macro askes for the material thickness when you zero your cutter and uses that to work out the Z height. Now you can either spend your time measuring the material thickness for each job or you can do the smart thing and by changing how you zero your machine you can get perfect depth pockets and cut right through your material without cutting into your spoilboard. It is either thicker or thinner but never the advertised thickness. Lets face it the material you buy at your local store is never the thickness they advertise it at. This Autotool Zero feature is unique in that it allows the cutter to be set anywhere on the table referenced to either the stock surface or the table top using the nominal thickness of the material as a reference. This page contains links and information on the new AutoZero tool setting Scripts and Macros for both Mach3 and UCCNC.

Cnc touch plate amazon